LED Strips are individually addressable ribbons of RGB (red green blue) lights, meaning that each light on the ribbon can be controlled by itself and give off any color on the visible color spectrum. Every light on the strip has its own chip onboard that processes commands given to it by the Arduino.

NeoPixel Library

#include <Adafruit_NeoPixel.h>

Adafruit_NeoPixel strip = Adafruit_NeoPixel(30, 6, NEO_GRB + NEO_KHZ800);

void setup() {
  strip.begin();
  strip.show();
}

void loop() {
  for (int i = 0; i < strip.numPixels();  i++) {
    strip.setPixelColor(i, strip.Color(255, 0, 0));
  }

  strip.show();

  delay(100);
}

Ultrasonic sensors are distance sensors that use sound waves to detect how far away an object is. They send out high frequency bursts of sound and listen for its echo. They then determine how far away the object is based on how long it takes for the sound to return to the sensor. This variety requires an Arduino library to operate.

NewPing Library

#include <NewPing.h>

NewPing mysensor(5, 6, 200);

void setup() {
  Serial.begin(9600);
}

void loop() {
  int pingTime = mysensor.ping();

  int distance = mysensor.ping_in();

  int distance_cm = mysensor.ping_cm();

  Serial.println(distance);
}